Jump to content

The Forge, O' Sand

 Share


Aryon

Recommended Posts

As you turn around the corner of the grand gate of the War Uzg, your eyes scan over your surroundings. You manage to spot a group of Orcs gathering around a building with smoke trailing off the roof, and the clangs of metal echoing to your ears. Interested, you begin the walk over to the building, the sounds and heat getting heavier with each step. As you peer through a gap of 2 people, you see an Orc leaning over a furnace, a fire blazing around a clay pot. As you give the pot a quick glance, you realise that a shiny, silver liquid is inside.

With this in mind, you turn to one of the fellow Orcs, a small frown of confusion forming across your face. "Wub iz dat Uruk duin'?" You are shot down with a quick growl, and you let a loud huff out. You continue to watch the performance, preventing yourself from speaking again, in fear of being shut down yet again. As you continue to watch, the man pulls the pot out, and pours it into the mould of a poorly scraped sword. With this done, the Smith then grabs a large hammer from the rack, a small grunt forming from his throat at the weight of it.

As he turns down to the blazing liquid, he begins to slowly slam his hammer into the mould, sparks flying in multiple directions. The sparks land on the Orcs skin, but they seem to not break his steady concentration, as his eyes remain locked onto the liquid. With every blow, the liquid hardens that slight bit more. As you continue to watch the man, you realise he has a pair of tongs in his hands. As he grasps the metal, he slowly lowers the metal into a pool of water, and steam erupts from the water, dancing around the blade.

As you give the blade a glance, you realise that it is strong and sturdy. As the Orc goes over to the fire again, he places the blade into the heat, flames roaring and dancing around the blade. As the blade turns the required orange hue, the Orc quickly retracts the blade, quickly slamming it onto the anvil. He hurriedly slams his hammer into the blade, a somewhat rhythmic pattern forming with the blows. With each and every blow, the blade flattens out, and begins to harden.

As the blades orange color leaves it, the Orc places the blade into the water again. The same action of steam repeats itself, as it dances through the air, a small, lopsided grin forming on the smiths face. As the Orc slams the blade onto the anvil, he pulls a quick hilt out of a chest. He quickly screws it into place, grabbing a small bit of Halfling-Skin off the wall, wrapping it around the handle. He grabs the blade, and gives it a few swings, the blade slicing through the air.

As he nods slightly, he grabs a piece of flint out of his pocket. He slowly and carefully runs the flint down to the blade, a scrapping sound piercing the air. As he continues this, a small chuckle resounds from his chest, as he looks at the finished blade. With a final breath, he slips the blade into a pre-made sheath, handing it to one of the Orcish warriors.

"Whu elze neyded a luzk ur zult? Mi am kraftin' nuw, su latz bettar blah nuw!"

[ I will be taking requests for RP, and I will create your weapons / armor in-game. If you cannot seem to find me in-game, shoot a post on this thread, and I shall craft your weapon on the forum. After it has been RP'd and all, I will create your weapon / piece of armor in-game, and give it to you. I will not accept people who simply go "I do not wish to go through the RP, please just give me the sword." This is a Role-Play server, so act like it. I wish to change role-play smithing, so that people actually do it. Quite frankly, I hate it when people craft without any Role-Play. Anyway, getting off topic. Enjoy, and please, do not post any OOC posts without posting some RP! ]

Link to post
Share on other sites

(Can you make skins of armor?)

Link to post
Share on other sites

[ I should be able to, yes. It will require a small amount of time, as I generally take quite a while with skins. ]

Link to post
Share on other sites

((Alright like seriously we need to start making Shurr'dru weapons and armor. Could work well considering the skins you make. It would also help flesh out orcish armor. Considering that we would be using what we could harvest from it, and would be a trademark of ours. Seeing as the Shurr'Dru is a trademark of ours. ))

Link to post
Share on other sites

Grool looks over his odl aprentice's shoulder, nodding slightly. He growls in a light town, "Hosh... hosh wurk." He prepares to smith some skah-iron, the recipe unknown to most of the orc smiths.

(I can make things as well, though my skinning skills are a bit out of practice.))

Link to post
Share on other sites

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.



×
×
  • Create New...