Competition Trial Of The Artisan

[Neri 3590]

 

 

Come one, come all! All Craftsmen (and women!) of the land are called to show their prowess in their chosen arts. It is time to prove, once and for all, who is to be crowned as the most masterful artisan in their field!

 

 

 

In order to enter this competition, you may merely submit the name of the profession you wish to enter for, and a full, uncropped image of your experience level in stated profession.

 

Additionally, you may also submit one roleplay session (either screenshots or a written piece) of you making/obtaining an item that is part of your craft! This is not part of the main competition, but additional prizes may be granted to those who show prowess in roleplaying their profession - it’s not all about stats and grinding after all!

 

When the closing date elapses, the three highest level players in each profession will be selected and given their respective prizes at the start of 4.0, as well as a bonus prize to the person who writes the best roleplay scenario in each profession.

 

All entries must be submitted HERE or at the link at the bottom by the closing date stated below! You can edit your submission up until the end date incase you level any further after you submitted. That's all, folks, and happy crafting!

 

Opening Date: 26th of July 2014

Closing Date: 4.0 Opening Day (Soon™)

 

 

Three books of the Grandmaster. These books are the collected teachings of a Grandmaster in your art from ages past. You are sure to glean a great deal of information from reading these, aiding you in your profession.

 

 

Grandmaster’s Tool. This tool of your profession, left behind by a long-dead master in your chosen art will serve as a reminder of what you strive for. It’ll be pretty good for bragging about, too!

 

Mining: Pickaxe

Lumberjack: Axe

Fisher: Fishing Rod

Breeder: Training Stick

Chef: Culinary Set

Farmer: Hoe

Enchanter: Staff / Book

Alchemist: Alembic

Stonemason: Chisel

Woodworker: Woodworking Plane

Leatherworker: Skinning Knife

Blacksmith: Hammer

Tinker: Toolbox

 

 

Two books of the Grandmaster. These books are some of collected teachings of a Grandmaster in your art from ages past. You are sure to learn a good deal of information from reading these, aiding you in your profession.

 

 

A book of the Grandmaster. This book is part of the collected teachings of a Grandmaster in your art from ages past. You are sure to learn some information from reading it, aiding you in your profession.

 

[LPT 771]

((fIrst?))

[CommunistSpy 441]

((second and reserved

 

http://gyazo.com/ceb71b464fc6db7a9411e7b72707620f
http://gyazo.com/00883bf4663c5811b241b699116a9ed5
http://gyazo.com/feaeeb1e360111d447a004f872ce699d
http://gyazo.com/3f9007b71789f3b63c8adb4b5d572723
http://gyazo.com/5146bfbd992511364f8e9d65e5088a09
http://gyazo.com/207290dd117a0391ac95f3df6d01943b

 

Crescendilim (Sevisa) and I (August) making cookiz. 

[Fimlin 1997]

Starts day of vacation... GG

[Lark 2227]

[Luchian 214]

Are we allowed to change our input if we gain a higher level before 4.0?

[Crayfishchris 751]

Too much effort.......................................

[Neri 3590]

 

Are we allowed to change our input if we gain a higher level before 4.0?

 

I believe it says that, yes. Just click the submission link again and choose 'edit my submission'. 

[Tadmonster 54]

((is it okay if I provide smithing Rp from some smithing i did several months ago...I am quite proud of it, so I hope it is what I can do))

[Neri 3590]

((is it okay if I provide smithing Rp from some smithing i did several months ago...I am quite proud of it, so I hope it is what I can do))

 

Fair enough! 

[Tadmonster 54]

Alright, here we go!

 

This is my submission for the Best Roleplaying of a Profession. My IGN is Tadmonster, and my Profession is smithing.

 

I put it here, because there are simply too many pictures to fit on the submission form! So anyway I may just give a link on my submission form to this forum...seeing as how this was...lengthy. In reality, this is the only one I have a chance in, so that's why I posted it here as well...who knows, maybe this will help out whoever needs some inspiration for their profession!

 

I was blacksmithing a Staff Sword (as seen here click this whole note), and decided to really let go and have fun. This was a great great project, and I had so much fun! I was given the task by Lark Steelwall (Origin_Lark), so thank you Lark for being a big support and I hope this is what shows my hard work!

 

Anyhow, its a lengthy read, so bite down!

 

http://gyazo.com/bad8e875678fd3859b1fcdd500a710c6
http://gyazo.com/326f328652bf71ffe95c47fe0e09bd45
http://gyazo.com/2bf824d35bc04ad15cea46186eda5e63
http://gyazo.com/35b21dd5bde60f811935e1bdd53d9a65
http://gyazo.com/08bfb1bcfa53f32c2bac86d6464a42f5
http://gyazo.com/e413d21fe74c661e70fe598652fc221b
http://gyazo.com/8ca93ba8ade90558851fc2ffea99c2df
http://gyazo.com/2650e21ef3af823400e9315671bb70c3
http://gyazo.com/0464176f06bedfe87979afd73f5b588b
http://gyazo.com/7c1d90c5a9d32e17bf80ab5587f24675
http://gyazo.com/5dd2f124a3f9af9d4f1904cf054fe197
http://gyazo.com/ba478020ab227da4e30aa9ea74b9e730
http://gyazo.com/dee854426b5a44bbe723a0273d3d98f0

 

 

Also! Here is my basic sword smithing! This took a while, but I am quite proud, so this may be more readable and understandable than the above. It could also serve as more pr0of of my roleplaying ability. So anyway, here I go, making a basic iron longsword.

 

http://gyazo.com/af88f2353601599c231833d7e6f7516d

http://gyazo.com/fb5fef900ee0ddcdad99493621b5224d

http://gyazo.com/8ac231503426ccfdb4d7ef34d19e62b5
http://gyazo.com/9c260f555885121cd2487b5a312c7ba2
http://gyazo.com/c5257e58401da8ddf366ba661acbc597
http://gyazo.com/4f20b7dc6c6557f8fda16e699246a239

http://gyazo.com/4b63fdbf70ac46262651bf089f6d4723
http://gyazo.com/466223aaaace4e6d57731dd6393b6193

http://gyazo.com/5f073c5bf7003150a18e9d3ac2a076ca
http://gyazo.com/69b37f57bbf58b67ce4bfdc88e66e333
http://gyazo.com/f27dff642cf635328a612af8b81aa1f0
http://gyazo.com/5cd4874f118eb755ee0e178be71e58f0
http://gyazo.com/740d95ded2a5e10cffb7cbfb8b130792

 

 

Edit: I apoligize for my countless typos in the roleplay process! I am truly quite an awful typer when I type fast, but I hope that the rich roleplay makes up for it!!!

[oblivionsbane 714]

I haven't leveled up a single profession since the start of this map. xD Too busy RP'ing, and none of the professions really suit anything my character does. (Maybe woodworking or tinkering someday, but really he is a fletcher and engineer.)

[Lark 2227]

 

 

And they said a Staff sword couldn't be done :3

[Luchian 214]

So are we to submit the written text in a forum post here, a pm or on the google spread sheet?

[wolfdwg 2677]

Uzshak'Lur crafting his finest blade, on a hot afternoon in the desert of the Orcish city. *Edit* Also sharpening his old blade.

 

Pics:

 

Stats: (Not the best.)

 

http://gyazo.com/bb315aeb721e32378a3a979f87d92d4b

 

Roleplay:

http://gyazo.com/039b0314bf4cc027bac8e981018ca9e9

http://gyazo.com/a888023dc4b8b9395430ad391edd3f26

http://gyazo.com/9e82e518eee543aafab59de1829dba63

http://gyazo.com/beb85bb947ace32c4245a9db2892fbc5

http://gyazo.com/c15484f763b4d21d7923262122eda1d3

http://gyazo.com/a86931001bd19b5b98c14fcf4cc9b4d4

http://gyazo.com/4d5fd35f9d28f465ec568256fd8a796e

http://gyazo.com/190708471f38b38057d4c0f9aae79348

http://gyazo.com/725b7492fbb64cde04004d8be72d32bb

http://gyazo.com/725b7492fbb64cde04004d8be72d32bb

http://gyazo.com/edab8b85ed00196c75fa3cf7de9cdaf5

http://gyazo.com/3de521b3a55b674d9e08f6c214f5b8e8

 

And that's Uzshak's way of makin his new OP blade.

 

What the blade looks like MCLY

 

http://s1347.photobucket.com/user/WolfThePict/media/2014-07-26_193426_zps42e0571a.png.html

 

Supposivly what it closely resembles.

 

http://img1.wikia.nocookie.net/__cb20121120010226/deadliestfiction/images/d/d2/UrukBerserkersword-med.jpg

 

Had fun with the RP doing this :)